Oil that cured overnight
Machining centres leaked oil onto the floor, where it bonded with metal chips. Under continuous production it hardened into a film that made walkways sticky and slippery.
Heavy oil, clean around the clock
Machining oil mixed with metal chips had cured into a slippery film. Mops could not strip it, and the plant struggled to keep cleaners on the job.
Heavy oil, clean around the clock
- 2,000 m²Workshop floor
- 24/7Cleaning window
- AutomaticCharge, fill and drain
Project at a glance
- Industry
- Manufacturing & factories
- Scale
- 2,000 m² machining workshop
- Recommended model
- C5
The situation
What the site looked like before the robots arrived.
A heavy-machinery plant · 2,000 m² machining workshop
A job that was hard to fill
Heavy-oil cleaning is physically demanding and recruitment was difficult. Coverage, cleaning quality and consumable costs all suffered at once.
How it was deployed
How the machines were put to work.
Pressure and agent, not just water
C5 adjusts brush pressure and dosing to the floor. A high-pressure wash with cleaning agent softens and lifts cured oil, while dual roller brushes and edge cleaning take the rest.
The workstation closes the loop
Routes cover the workshop and return to the workstation for charging, filling, draining and tank rinsing. No one has to enter the production floor to keep it running.
How the day runs
The same route follows the site, not a shift handover.
Aisles stay open
Cleaning moves between production windows instead of waiting for a handover.
Full-floor coverage
The workshop is cleaned corner to corner, with the oil hotspots taken first.
Back to the dock
Charging and water exchange happen without a manual call.
Related
Each project states the venue, the scale and the result the site tracks. Client names are withheld; figures are reported as the project supplied them.